CC2525H OPERATOR’S MANUAL
CC2525H Specifications
CC2525H Specifications
Saw Model
CC2525H-14
CC2525H-20
CC2525H-26
Blade Guard Capacity
14" (350mm)
20" (500mm)
26" (700mm)
Blade Cutting Depth Max
4.5"
7.5"
10.5"
Blade Shaft Speed
(1)
2625 rpm @3600
Engine rpm
2625 rpm @3600
Engine rpm
2025 rpm @ 3200
Engine rpm
Blade Flange Size
5" OD
5" OD
5" OD
Engine Model
Honda iGX800
Engine Type
V-twin, air-cooled, 4-stroke, OHV, electronic fuel injection
Rated Output Power
29.4 hp (18.6 kW) @ 3600 rpm
Peak Torque
40.2 lb.-ft (54.5 Nm) @ 2500 rpm
Rated Speed
3600 rpm (Honda rating)
Engine Oil
SAE 10W-30, 2.1 qt. (2.0 L)
Fuel Type
Unleaded gasoline, 86 octane or higher
Fuel Tank
4.4 Gallon (16.7 L) with dial gage level indication
Battery
12 Volt (700 CCA) group size 34
Hydraulic Lift Pump Fluid
Automatic Transmission Fluid (ATF); (2 Liter capacity)
Lubrication Type
NLGI #2 Lithium grease
Blade Arbor Size
1" Diameter with drive pin
Blade Flange Style
Quick disconnect
Blade Shaft Size
1-1/2" OD with left/right side blade mounting
Blade Shaft Bearings
2 Pillow block bearings
Blade Shaft Drive
5 V-Belts (3VX425)
Blade Coolant
Dual stainless steel multi-jet spray tubes
Blade Guard Attachment
Slip-on tapered spade
Blade Raise and Lower
(Hydraulic)
Electro-hydraulic power unit with push button control
Blade Raise and Lower
(Electric)
Ball drive actuator, 6” stroke, 20:1 reduction, 12VDC motor
Blade Alignment
Telescoping front/rear left and right pointers
Axle Size (Front/Rear)
Front: 1" OD straight / Rear: 1" OD straight
Front Wheels
6" x 2" with 1" rubber tread (sealed roller bearings)
Rear Wheels
8" x 2" with 1" poly tread
Rear Wheel Transmission
Eaton Model 6 transmission with chain drive
Transmission Belt
V-Belt (4L500)
Rear Wheel Drive
Gear drive
Handle Bar Adjustment
Variable extension with dual 0° and 30° angle range
(1) Theoretical speed, actual speed may vary.
11
Summary of Contents for CC2525H
