19
Verifying the driver
To verify the driver of the adapter, follow the step below to
open the
Device Manager
on Windows operation system.
1. Following the path as below to open the device manager
Windows 7
®
:
Control Panel
\
System and Security
\
System
\
Device Manager
Windows Vista
®
:
Control Panel
\
System Maintenance
\
Device Manager
Windows XP
®
:
Control Panel
\
System
\
Hardware
\
Device
Manager
2. A string similar to
USB.. Adapter
device should be listed.
®
The screen shot above is demonstrated by Windows 7 and
might be varied slightly for each operating system.
Note:
If there is a
(question) or
(exclamation) mark
next to that item, then the driver is not properly installed.
Please delete the item, unplug the adapter and repeat the
installation steps.
20
Using the adapter
There are several ways to utilize the monitor attached on
the adapter. The add-on monitor can be configured to use
either “mirror mode”, “extended mode” or be the primary
display as described in this section.
Mirror mode:
Duplicate the primary display and mirror to
the add-on monitor(s).
Extended mode:
The Windows Desktop will be spread to
the add-on monitor(s).
Primary mode:
Assign the add-on monitor to the primary
display.
Note that the following screen shots in this section are
using Windows 7
®
operation system. It may not match your
operation system but the definitions of buttons, tabs and
menus are the same.