6
August 2014
You can calibrate your sensor at any time, once you have initiated a session.
To do so, Select Calibrate on the top left side of the app.
Set your bat on the plate so that it matches the illustration. Stand at a normal
distance from the plate and align your back foot to be even with the middle point
on the plate.
Select Start Calibration on the bottom right of the app. You will need to
complete the initial sensor calibration within 8 seconds.
Capturing Swings
Get to your natural load point. Do not move the bat excessively when capturing
swings.
Battery Life and Power
Turning Sensor On
:
Press the DK logo on the top of the sensor to turn it on.
You will see a green light
Flash rapidly if not paired. Flash slowly
Determine Battery Charge: A battery indicator is listed at the the top of the
screen when you are paired with the app and collected session data ; It will alert
you when the battery is low.
Sleep Mode: The sensor will go into sleep mode and the light will stop blinking if
you have not used it for seconds. It will automatically wake up and the green
power light turn once the sensor is picked up.
Turning Sensor Off: Press and hold the button on the top of the sensor to turn it
off.
The battery will last up to 7 hours with continuous use.
Memory
The SwingTracker sensor will collect about 125 swings between data uploads.
SWINGTRACKER APP
Downloading the Mobile App
Summary of Contents for DKST01
Page 1: ...1 August 2014 User Guide...