4
August 2014
GETTING STARTED
What comes in the Box
Sensor
Sensor Strap USB Charging Cable Protective Storage Pouch
Works with the Free Diamond Kinetics Mobile App
USING YOUR DIAMOND KINETICS SENSOR
Attaching your Sensor to your Bat
Place the end of your bat on a firm surface with the knob pointing upward.
Stretch the round hole in the center of the sensor strap over the knob.
Position the sensor, with the soft rubber side downward, on top of the bat knob.
Hold the sensor in place with your finger.
Pull each of the three strap ends over the top of the sensor so that the top of
the sensor should remain completely free of the strap.
Confirm that the sensor is firmly secured.
Your Diamond Kinetics sensor should be attached to your bat on the knob end
only using a Diamond Kinetics strap. Do not use any other mechanism to attach
your sensor to you bat; doing so will void the
manufacturer’s warranty.
Turning On and Off your Sensor
Summary of Contents for DKST01
Page 1: ...1 August 2014 User Guide...