Diamond H2O Reliant DRS4-EM-15, Manual

Page: 13 / 19

pg. 12
Table 3: Level I Programming (2).
Parameter
Description Range of
Values Minimum
Increment Default Units of
Measure
Notes
P4 Set Calendar
Override 0-99 1 0 days 0 = no calendar override,
0.5 = regeneration twice a day
at time of regeneration and 12
hours later.
Calendar Override skipped if at
least one Day of Regeneration
selected. Can be locked out of
changes in Level I programming.
P6 Set Amount of
Regenerant S, H, L N/A S N/A S – Standard (9lbs/ft
3
resin)
H – High (15lbs/ft
3
resin)
L – Low (3lbs/ft
3
resin)
Lower salt settings are more
efficient, but will regenerate
more often.
P7 Estimated
Capacity N/A N/A kg Cannot be changed
Displays calculated capacity
(based on volume of resin used)
P8 Hardness 0-99 1 25 Grains per
gallon Sets Water hardness level
This value is used to calculate
estimated capacity