DIMENSIONS
D5 5.1
Length:
17"
Width:
12"
Height:
2 3/4"
CONTINUOUS RMS OUTPUT POWER
Note: Full Rated Power is generated at all voltages between 11 and 14.5VDC.
D5 5.1
60W x 5 @ 4 Ohm (min. impedance)
and
70W x 2 @ 4 Ohm
or
140 x 2 @ 2 Ohm (min. impedance)
or
280 x 1 @ 4 Ohm Bridged (min. impedance)
CROSSOVER SPECIFICATIONS
Quantity:
5 - Fully Independent
Type:
3 Defeatable Fixed Highpass (front, rear, and center)
1 Adjustable Lowpass (sub channels)
1 Adjustable Sub-sonic (sub channels)
Slope:
12 dB/oct.
Alignment:
Butterworth
FUSE RECOMMENDATIONS
D5 Professional Reference Series Amplifiers
come with circuit board mounted
fusing. In addition to that we recommend that you install the correct size
fuse/holder combination to the main power cable within 18 inches of the
battery. This will protect your vehicle from fire damage due to a short circuit
to the chassis or vehicle body. If a single amplifier is installed, follow the fuse
recommendation below. If installing multiple amplifiers, add up the total fuse
ratings of all installed amplifiers. This should be used as your main fuse rating.
Amplifier
Maximum Fuse Rating
D5 5.1
90
Diamond Audio Technology 2
