Diamond Aircraft DV 20 KATANA, Maintenance Manual

Page: 387 / 743

AIRCRAFT
DV 20 KATANA AMM
Flight Controls
Doc # 4.02.02
Rev. 13
27-50-00
Page 7
15 Dec 2018
5. Adjustment
After a repair of the flap system a check of the system to verify the correct flap travel given in
Sub-Chapter 06-00 must be carried out.
The end positions of the flaps are adjusted with limit stop micro switches. Refer to the sketch below
%
and to Wiring Diagram D20-9227-50-01 in Chapter 92.
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
Figure 5: Micro Switch Designation
To move the switches, first release the mounting screws. After moving the switches to the desired
position, re-tighten screws.
A. Initial Adjustment of Wing Mounted Parts
)
With wing removed from fuselage, lock flap at 25° deflection.
)
Adjust push-rod at flap horn until outboard bellcrank is at right angles to push rod.
)
S/N's 20.005 thru 20.100: Adjust rod end in wing root until vertical arm of bellcrank is parallel with
root rib.