Diamatic 3140 DBP, Instruction Manual

Page: 9 / 48

www.diamaticusa.com
info@diamaticusa.com
The choice of professionals
7/12
US
Dimensions
Figure 3
Model
3140 DBP
230/60 440/60
A (mm) 1600
B (mm) 1200
C (mm) 600
Weight (kg) 212 212
Model
3140 LPP
230/60 440/60
A (mm) 1600
B (mm) 1200
C (mm) 600
Weight (kg) 216 216
[ NOTE ]
■ Storage conditions:
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
■ Operating conditions:
Maximum altitude: 800 m
(Up to 2,000 m with reduced performances)
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
Controls, indicators and connections
Figure 4
1. Dust container release lever
2.
Castor lever
3. Main switch
4.
Start button
5. Stop button
6. Voltage presence white indicator
7.
Thermal protection operation red indicator
8. Pressure governor
Inspections prior to starting
Figure 5
1. Inlet
Prior to starting, check that:
■ The filter is installed.
■
All latches are tightly locked;
■ The vacuum hose and tools have been correctly fitted
into the inlet ( 1 );
■
The bag or safety container is installed, if applicable.
Do not use the device if the filter is faulty.
Starting up
Figure 6
1. Castor brakes
Lock the castor brakes before starting the vacuum cleaner (1 ).
Starting/stopping the vacuum cleaner
■ Turn the switch ( 3) (figure 4) to “I” position to
electrically power the vacuum cleaner. The voltage
presence indicator ( 6) (figure 4) comes on.
■
Push the start button ( 4) (figure 4) to start the vacuum
cleaner.
■ Push the stop button ( 5) (figure 4) to stop the vacuum
cleaner.
■ Turn the switch ( 3) (figure 4) to “0” position to turn off
the electrical power of the vacuum cleaner.
WARNING!
Check the pressure of the air used to clean the
filters which is produced by the compressor.
It must never be superior than 5.5 bars, if
necessary, adjust it to the correct level using the
related pressure governors (9 e 11) (figure 4).
WARNING!
The activation of the indicator (7) (figure 4) signals
the operation of the vacuum unit thermal protection
due to the excessive electrical power draw of the
unit.