15. FILTER CLEANING DEVICE
& SUCTION MODE
MANUAL FILTER CLEANING
Close the suction nozzle (A) and act on the lever (B) to clean the filter,
with a fast movement.
If necessary, repeat the operation.
A
B
To make cleaning effective the vacuum cleaner
must be in operation
16. TROUBLESHOOTING
You can thus solve any problem that may occur.
Motors do not start.
u
No electrical voltage.
u
Check cables, plugs and socket.
Suction capacity decreases slowly.
u
Filter, nozzle, suction hose or suction pipe may be blocked.
u
Check, clean accessories. Clean filter.
Dust comes out during the vacuuming.
u
Filter has not been fastened correctly or is defective.
u
Check to see if filter is sitting properly; replace if required.
1 - Close the bag with two
distanced bands.
2 - Cut the strip between the
two bands.
3 - Pull the Infinity Bag end to
make a new bag.
17. COLLECTION BAG USE
The dust and the particles are collected in a bag placed in the container
under the hopper.
The Infinity Bag system consists in a plastic tubular from which are ob
-
tained 20/30 bags of different weights and dimensions.
Once finished or damaged, the tubular must be replaced by a new refill.
The operations below described must be carried out when machine is
turned off.
