1. INTRODUCTION
This user and maintenance manual will set out the guidelines and proce-
dures that must be followed by those operating this equipment in order to
guarantee:
• Operators’ safety
• Correct use of the machine
• Optimum performance
IT IS NECESSARY THAT THE AUTHORIZED PERSON-
NEL AND MACHINE OPERATOR HAVE READ AND
UNDERSTOOD THE MANUAL BEFORE USING THE
MACHINE.
Due to the importance of this information, we recommend that the opera-
tor:
• Always keeps this manual close at hand for easy consultation
• Keeps the manual in a safe place in order to prevent loss or damage
• Asks the manufacturer/supplier for a replacement copy in case of loss or
damage
• Supplies this manual and the manufacturer’s details together with the
machine if it is sold to a third party
IF THE PURCHASED VACUUM CLEANER IS ATEX
AUTHORIZED, THE TECHNICAL PLATE ATTACHED TO
THE ENGINE HAS A SERIAL NUMBER THAT IS USED
FOR REQUESTING A COPY OF THE CERTIFICATE IF
THIS IS DETERIORATED OR LOST.
The manufacturer reserves the right to update its products and manuals
and is not required to provide updated versions of the them.
2. WARRANTY
The vacuum cleaners manufactured by DiamaPro have been fully inspect-
ed to guarantee correct electrical, pneumatic and mechanical function.
The vacuum cleaners are covered by a 12-month warranty. All defective
parts of the machine are covered by warranty but this does not include
parts damaged during shipping, handling or use nor does it cover parts
damaged by normal wear and tear.
Repairs can be carried out by an authorized service center or directly by
DiamaPro.
To request your warranty service you MUST send a written request to the
dealer or directly to the manufacturer including the manufacturing details
that can be found on a plate fitted inside your machine together with a
copy of the invoice.
The warranty is valid under the following conditions:
• Improper use of the machine or total or partial failure to comply with the
contents of this manual
• Any part of the vacuum cleaner is altered or modified in any way
• Incorrect electrical installation
• If the laws in the country of use are not respected
• Inadequate maintenance
• The machine has not undergone routine maintenance as specified in this
manual
• Use of spare parts that are not produced by DiamaPro or not specifically
indicated for the model in use
• Partial or total failure to comply with the instructions given in this manual
3. UNINTENDED USE
• Never suck up cigarette butts that have not been properly put out and/or
any other flammable materials
• Never suck up substances that may explode in contact with the air
• Never operate in environments where explosive gases and/or gases from
toxic chemical products are present in the air
• Check the suitability of the cartridge filter before sucking up toxic sub
-
stances
• Disconnect from the power outlet before accessing any electrical compo-
nents of the machine
• Do not modify the machine in any way
• Do not use the machine in a way that does not comply with the require-
ments of this manual
4. MACHINE DATA
4.1 TECHNICAL DATA PLATE
Every DiamaPro machine carries a registration plate showing essential
details that are necessary when contacting the supplier/manufacturer for
advice, suggestions or information on spare parts. The following details are
included on the plate:
• Manufacturer
• Model
• Supply voltage
• Installed rated power
• CE symbol (built in compliance with Machinery Directive 2006/42/EEC)
4.2 TESTING
All DiamaPro machines are tested before packaging and delivery in order
to ensure the correct function of each component. An accurate electrical
safety test is carried out in compliance with specific electric safety stan
-
dards related to:
• Ground continuity test
• Insulation resistance test between every phase and the ground
• Dielectric test
• Measurement of dispersed current
• Measurement of power and absorbed current (acceptable difference of
+/-10% of rated value)
• Measurement of maximum depression and air exhaust values (tolerance
of +/-15% based on temperature values and humidity of environment)
• Measurement of maximum air absorption
4.3 SAFETY DEVICE
The vacuum cleaner has been manufactured in compliance with all legal
standards for the operator’s safety.
• All metal components are grounded to eliminate shock or electrostatic
discharge, including the flexible suction hose that is properly grounded.
Also in this regard the choice of a suitable flexible suction hose allows to
eliminate this risk on the hose length that goes from the use area to the
vacuum cleaner.
• The brakes fitted onto the anterior pivoting casters safely fix the machine
in its place of use where there may be a risk of movement due to uneven
floor surfaces or other particular working conditions.
BEFORE USING THE MACHINE CHECK THAT THE
MACHINE HAS NOT SUFFERED ANY SHOCKS OR
DAMAGES DURING THE TRANSPORT THAT CAN
AFFECT THE OPERATION OF THE ABOVE DEVICES
5. PERFORMANCE TOLERANCES
The performance of the turbine may vary by 15% based on the tempera-
ture and air humidity.
The safety valves are calibrated based on the amperage of the turbine.
6. SAFETY PROVISIONS
• Carefully read the instructions in this manual before starting, using, ser-
vicing or operating the vacuum cleaner
• Check that the vacuum cleaner hasn’t been damaged in any way
• Never turn on the machine if it is faulty or if you suspect it is faulty
• Check that the switch isn’t worn or damaged
• Do not approach the suction intake of the machine with unfastened or
broken garments that could easily be sucked into the machine
• Check that the filters are present and efficient
• Make sure that the filters are installed correctly and in full working order,
always observing the regulations in force in the workplace
• Do not carry out repairs without the manufacturer’s authorization
• Never use gasoline, solvents or other flammable liquids for cleaning; only
proper detergents should be used for cleaning
• Never move the machine by pulling the power cable or flexible hose
• Never direct the opening of the machine or the flexible tube towards
people or animals
• Protect the machine from the rain
• Check that the machine is connected to a power source with the correct
voltage indicated on the registration plate
• Make sure that the power cable has no wear or damage. If replacing the
cable, always replace it with another of the same specifications as the orig
-
inal one: cables that are not approved or of inferior quality may overheat
and cause serious injury to the user
