16
5.
Mount the rail slides to the rack and secure them with two M5 screws at each end.
There are a total of 8 screws, you will use two screws at each end of the rails. Torque to
4.5~5.0 kgf-cm (3.9 ~ 4.3 lbf-in).
6.
Slide the server (with the attached inner channels) into the slide rails and push the
server all the way into the rack.
7.
Slide an ear washer onto the two 6-32 flat head screws and screw the 6-32 flat head
screws (with the ear washer) into the hex screws you installed in Step 3. You will install
these screws a total of two times. Torque to 3.5 kgf-cm (3 lbf-in).
