157
Dialogic
®
DSI SS7MD Programmer’s Manual Issue 3
7.10
MAP Configuration Commands
The MAP configuration commands are:
•
MAP_CONFIG
-
Configure MAP
•
MAP_TRACE
-
MAP Trace
7.10.1
MAP_CONFIG – Configure MAP
Synopsis
The MAP_CONFIG command provides the MAP operating parameters and, if used, must appear after the
SCCP_SSR
commands in the
config.txt
file. The use of this command is not required and MAP is configured
with default values if the MAP_CONFIG command is not present.
Syntax
MAP_CONFIG <options>
Example
MAP_CONFIG 2
Parameters
The MAP_CONFIG command includes the following parameters:
•
<
options
>
Specifies MAP protocol options as defined for the
MAP Configuration Request
message in the
MAP
Programmer’s Manual
.
7.10.2
MAP_TRACE – MAP Trace
Synopsis
The MAP_TRACE command is used to configure MAP to send trace messages to the trace module whenever a
specific message type is sent or received. See the
MAP Programmer’s Manual
for details.
Syntax
MAP_TRACE <op_evt_mask> <ip_evt_mask> <non_prim_mask>
Example
MAP_TRACE 0xf 0xf 0x4
Parameters
The MAP_TRACE command includes the following parameters:
•
<
op_evt_mask
>
Output event trace mask.
•
<
ip_evt_mask
>
Input event trace mask.
•
<
non_prim_mask
>
Non-primitive trace mask.
