Dialogic BN500IP, Installation And Configuration Manual, Page: 28 / 46

Dialogic
®
BorderNet
™
500 Gateways Installation and Configuration Guide
Page 28
6. In the Internal SIP Card section, set the IP Address field to the IP address in the Network Interfaces section
of the SIPcontrol configuration screen, and set the RTP Media port region values to the RPT start port and
RTP end port values in the Network Interfaces section of the SIPcontrol configuration screen. For example:
7. Click Save to save the setting. This setting must also be applied on the Save/Load Configuration page before
it affects SIParator functionality. For information, see Applying the SIParator Configuration on page 35.
Configuring SIP Sessions and Media Services
To configure SIP sessions and media services, follow these steps:
1. Click SIP Services on the main menu of the SIParator web interface.
The SIP Services page appears.
2. Click Sessions and Media on the SIP Services page:
3. In the Local Ringback section, verify that the Play local ringback when new target rings option is selected.
For example:
4. Click Save to save the setting. This setting must also be applied on the Save/Load Configuration page before
it affects SIParator functionality. For information, see Applying the SIParator Configuration on page 35.