Dialogic
®
BorderNet
™
500 Gateways Installation and Configuration Guide
Page 10
Available Dialogic
®
BorderNet™ Gateway Versions
The following BorderNet 500 Gateway versions are available:
Note: For more information about licenses, see
Software Components
The following software is pre-installed on the BorderNet 500 Gateways:
• Dialogic
®
Diva
®
System Release LIN software, which includes the necessary Dialogic
®
Diva
®
Media Board
installation, configuration, tracing, and line testing utilities
• Dialogic
®
Diva
®
SIPcontrol
TM
Software, which includes the necessary SIP to PSTN gateway module installation
including a web-based gateway configuration
• SIParator software
Configuration Types
The BorderNet 500 Gateway can be connected to your IP network in four different ways, depending on your needs.
DMZ Configuration
With the DMZ configuration, the BorderNet 500 Gateway is located on the DMZ of your firewall and connected
to it with only one network interface. The SIP traffic finds its way to the BorderNet 500 Gateway by either using
DNS or setting the BorderNet 500 Gateway as an outbound proxy on the clients.
This is considered the most secure configuration, since all traffic goes through both your firewall and your
BorderNet 500 Gateway. It is also considered the most flexible configuration, since all networks connected to
any of your firewall’s network interfaces can be SIP-enabled.
Version
Boards installed
Channels
PSTN
Channels T.38/Fax
SIP traversal channels
BN500IP
None
IP only version with 25 SIP-to-SIP sessions
--
--
25
BN508BRI 1 x Dialogic
®
Diva
®
4BRI-8 PCI Media Board 8
8
8
BN501PRI 1 x Dialogic® Blue™ OneSpan-24/30-S-LP
Telephony Board
30
0
30
BN504PRI 1 x Dialogic
®
Diva
®
V-4PRI PCIe HS Media
Board
120
0 - 120 (separate license
needed; see note below)
120