RK10
RK10
RK10
RK10S
S
S
S
Roofing saw
Page 5 of 8
1.7.
Safety instruction for work with RK-10 Roofing Saw
When working with the machine the following instructions must be complied with:
1. It is prohibited to work with the machine with out the tool cover.
2. Person except the operator is permitted within the danger perimeter of the machine.
3 Start the machine only in the safety, non working mode. Ensure that the tool is a safe
distance off the ground.
4. Always change the tool with the machine in secure position with the engine switched
off.
5. Observe all general rules of safe work.
2.
TECHNICAL DATA AND DESCRIPTION OF THE MACHINE
2.1.
Description of the machine
The RK 10 Roofing Saw is primarily designed for cutting bituminous roofing materials
with two or four TC tips dia. 300 mm blade.
RK 10 Roofing Saw (further only saw) consist of an undercarriage, driving head with two
bearings, drive shaft, pulley, two flanges and M20 fastening nut. On the undercarriage is
mounted an engine with pulley two V belts and a cover. The engine mounting bolts are in
slots in the undercarriage to facilitate belts tightening. The swivelling tool cover with a
front traversing wheel is also mounted on to the undercarriage. The position of the tool
secured by a mechanical brace on a steel rod with threaded control close to the
handlebars. The handlebars are mounted on four flexible bocks.
2.2.
Technical specifications
Dimensions (l x h x w)
900 x 500 x 950 mm
Weight
51 kg
Tool diameter
300 mm
Main spindle rpm.
3000 rpm.
Engine
HONDA 1 cyl, 4-stroke
Engine rpm.
3600 ot.min
-1
Max. power
4.0 kW (at 3600 rpm.)
Type
GX 160
Fuel
Natural 95
Level of acoustic power A L
wag
108 dB
