background image

 
 

 

 
 

BF-410

  

Floor grinder

 

Strana 10 

6.

 

CONDITIONS OF GUARANTEE 

 
Diakat  machines  are  designed  and  manufactured  to  withstand  the  toughest  working  conditions  and  still 
remain safe, defect free and long-lasting. The following conditions are the same for the whole Diakat range 
of products. 
 
If  not  otherwise  agreed  the  manufacturer  guarantees  all  his  products  for  24  months  from  the  date  of  the 
delivery  to  the  end  user,  under  the  condition  that  the  first  year  paid  service  inspection  is  carried  out.  This 
guarantee service inspection must take place in between 10 to 12 month from date of sale. If this condition is 
not fulfilled the guarantee is 12 months
 
If  within  the  period  of  the  guarantee  a  defect  caused  by  faulty  design,  material  or  manufacturing  process 
occurs, the manufacturer will at his discretion remedy it by repair or replacing the faulty part.  
 
The guarantee do not cover consumer and fast  wearing parts such as air  filters,  spark plugs, V belts, cable 
wires, rubber covers etc.   
 
The guarantee also do not cover faults or damages caused by not abiding to the instructions contained in the 
Operators  manual,  unskilled  use,  use  of  the  machine  for  other  work  than  for  which  it  is  designed, 
unauthorised  service  interference,  faulty  or  inadequate  maintenance,  use  of  improper  fuel  or  lubricants, 
accident or act of God.  
 
Furthermore the manufacturer can not be held responsible for damages occurring during transport or storage. 
 

1.

 

The guarantee applies only to the end purchaser stated on the guarantee certificate. 

 
2.

 

The guarantee applies only to those parts of the equipment which demonstrates faulty material or 
manufacturing process and only for the period of 12 months from the date of sale shown on the guarantee 
certificate. 

 
3.

 

The Guarantee do not apply to wear parts such as rubber wheels, carbon brushes etc.   

 
4.

 

The Guarantee covers expenses incurred in order to repair or replace parts of the equipment that 
demonstrates faulty material or manufacturing process within the period of 12 months from the date of 
sale. Other expenses linked to the repair such as travelling, down time etc. are not covered. 

 
5.

 

The Guarantee period is extended by the eventual period of guarantee repair. 

  
6.

 

The Guarantee do not apply to the following: 

 

- faults or damages caused by not abiding to the instructions contained in the Operators manual  

 

- faults or damages caused by faulty or inadequate maintenance 

 

- faults or damages caused by unauthorised interference with the equipment structure  

 

- faults or damages caused by the use of other then recommended spare parts 

 

- faults or damages caused by the use of the equipment for purpose other than for which it was designed 

 
7.

 

The supplier is reserving the right to asses the fault of a part or whole of the equipment. If necessary the 
supplier can request the part for assessment. 

 
8.

 

For eventual Guarantee claim it is necessary to produce the Guarantee certificate or relevant invoice. 

 

Any other guarantees except those mentioned above do not apply to the equipment. 

 

 
 

 

Summary of Contents for BF-410












Reviews: