Diagraph PA/4000, Service Manual, Page: 58 / 213

PA/4000 User’s Manual
Section 5, Configuration
Page 19
STEP 7: Set the Transfer.
•
From the Output Delay screen, press the down arrow key twice.
•
Press the MENU/SELECT key once to enter edit (flashing) mode.
•
Use the arrow keys to enter a Transfer value of OFF.
•
TO ACCEPT CHANGES: Press the MENU/SELECT key.
•
TO CANCEL: Press and hold the 2nd key followed by the
MENU/SELECT key.
STEP 8: Set the Sensor #1 Edge.
• From the Transfer screen, press the down arrow key once.
• Press the MENU/SELECT key once to enter edit (flashing) mode.
• Use the arrow keys to enter a Sensor #1 Edge value of L for leading edge
(we use leading edge because we want to place a label on the front edge
of the box.)
•
TO ACCEPT CHANGES: Press the MENU/SELECT key.
•
TO CANCEL: Press and hold the 2nd key followed by the
MENU/SELECT key.
STEP 9: Set the Output Sensor.
•
From the Sensor #1 Edge screen, press the down arrow key twice.
•
Press the MENU/SELECT key once to enter edit (flashing) mode.
•
Use the arrow keys to enter an Output Sensor value of NC for no connect.
•
TO ACCEPT CHANGES: Press the MENU/SELECT key.
•
TO CANCEL: Press and hold the 2nd key followed by the
MENU/SELECT key.
STEP 10: Set the Darkness.
•
From the Output Sensor screen, press the down arrow key twice.
•
Press the MENU/SELECT key once to enter edit (flashing) mode.
•
Use the arrow keys to enter a Darkness value of 25.
•
TO ACCEPT CHANGES: Press the MENU/SELECT key.
•
TO CANCEL: Press and hold the 2nd key followed by the
MENU/SELECT key.