Diagnostic Instruments SPOT Xplorer User Manual Download Page 13

Specifications

 12 

Xplorer Hardware Guide

Power Supply Dimensions

Xplorer Series Catalog Information

There are three cameras in the SPOT Xplorer series of cameras.  The following table indicates
each catalog number with the standard configuration:

Catalog Part

Numbers

Description

Connectivity

XP1700

SPOT Xplorer Monochrome “C” mount camera

PCI

XP1740

SPOT Xplorer Slider “F” mount camera

PCI

FCC “Class A” Product Warning

This equipment complies with the limits for a Class A digital device pursuant to Part 15 of the
FCC rule. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference with radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case you will be
required to correct the interference at your own expense.

Summary of Contents for SPOT Xplorer














Reviews: