IOL-PORTABLE
16
17
600008-0000EN · Rev 1 · 2020/07
Command icons
Touch this to activate the live mode
When the live mode is turned on, the changes are written automatically
into the sensor
Touch this to read the parameters of the sensor
Touch this to write the changes into the sensor
Touch this to go ahead
Touch this to go back to the previous parameter
ATTENTION:
Don’t forget: Push
if live mode is not active
Parameter ultrasonic sensor
Reset sensor to factory settings
Configure switchpoint mode
(Window mode, Reflex mode, Single point mode)
Configure switchpoint logic NO/NC
Configure switchpoint 1 (mm)
