DHS Fitness DHS 5001, Manual

Page: 12 / 12

11
COMPUTER
A. Specification:
1. TIME----------0:00-59:59 MINUTES
2. COUNT-----------0-9999TIMES
3. REPS/MIN----------0-999 REPS/MIN
4. CALORIES-----------0-9999 CAL
B. Key Function:
MODE: This key is select and locks on to a particular function you want.
C. Operation procedures:
AUTO ON/OFF:

The system turns on when the MODE key is depressed or when the system sensed
a signal input from the speed sensor.

The system turns off automatically when the speed sensor has no signal input or no
key are pressed for approximately 4 minutes.
D. Reset:
The unit can be reset by changing battery or pressing the MODE key for 3 seconds.
E. Function:

COUNT: The count displays in first rank of LCD screen.

SCAN: Displays one function at a time and switch to others automatically
F. Battery:
This monitor uses one 1.5V AG-13 battery. You can replace the battery through the back
of the computer.
Please follow the step
(THIS DATA IS A ROUGH GUIDE FOR COMPARISON OF DIFFERENT SESSIONS.
EXERCISING SESSIONS THAT CAN NOT BE USED FOR MEDICAL TREATMENT.)
How to REPLACE battery:
1. 2.
3.
i. Take off the computer from the machine and turn it to the back carefully. Make sure
not to break or damage the cable. (Pic 1.)
ii. Take off the plastic protection cap. (Pic. 2)
iii. Take out the battery and replace it by a new 1.5V AG-13 battery with correct polarity.
(Pic. 3)
iv. Use the plastic protection cap to cover the battery.
v.
Press the “MODE” button to check the signal of computer. (if no signal, please
reinstall the battery again
vi. Install the computer.