DHS Fitness DHS 2632, User Manual

Page: 37 / 39

STEP 7:
a. Connect the Console Wire (1a) with the Mid Sensor Wire 1 (4).
b. Unscrew the 4 screws in the back of the Console (1) with Wrench (65) and set aside.
Push the wires down into the Handlebar Post (5) so they don't get pinched.
Attach the Console (1) to the Handlebar Post (5) with 4 Screws (2).
Use Wrench (65) to secure the screws. Then plug in the Trunk Line 2 (3) into the hole
in the rear of the Console (1).
c. Use the Allen Wrench (66) to unscrew the 2 Screws (9), 2 Spring Washer (8) and 2 Arc
Washers (7) from the handlebar post (5). Set the screws and washers aside for assembly
later in this step.Attach the handlebar (6) to the Handlebar Post (5) with 2 Screws (9), 2
Spring Washers (8) and 2 Arc Washers (7). Tighten with Allen Wrench (66).