24
DHOLLANDIA
10.1
NOTE FOR LIFTGATES TYPE DH-SMR* WITH BOLT-ON MOUNTING PLATES
•
For liftgates type DH-SMR* with bolt-on mounting plates, make sure that the slide plates stand straight and perpendicular to the lift
frame. [Figure 10.4]
•
The slide plates must be mounted symmetrically, at equal distance from the side of the lift frame, so that the lift frame and the platform
end up correctly centered at the loading floor of the vehicle. [Figure 10.4]
•
The slide plates must be bolted to the lift frame as explained in Figure 10.5, and all bolts fastened to the required torque. [Figure 10.5]
•
While mounting the bolts, it is ESSENTIAL that the L-shaped bracket [1 in Figure 10.6] fully slots into the slot [2 in Figure 10.6] foreseen
in the slide plate [3].
WARNING
•
Incorrect installation of the slide tubes, slide plates, bolts and small parts can lead to accidental fall of the liftgate off the vehicle
chassis.
•
A fall of the liftgate off the chassis can damage the liftgate and / or vehicle chassis, and can cause serious bodily injury or death to
the operator and any bystanders.
•
Therefore, it is essential that the slide tubes, slide plates, bolts etc. are installed following the instructions of this manual.
Figure 10.4
Summary of Contents for DH-SM
