background image

 

DHOLLANDIA 

3

 

CONTACT INFORMATION 

 
DHOLLANDIA liftgates are regularly being adapted to new vehicle and chassis developments and specialized customer requirements. 
Therefore,  DHOLLANDIA  reserves  the  right  to  alter  product  specifications  without  prior  notice;  and  potentially  modifications  or  new 
developments might not have been taken into account at the time of printing. 

NOTICE 

Please confirm you have reviewed the most up-to-date version of this manual prior to operation of the associated DHOLLANDIA liftgate. 
See below for instructions to download the latest version of the manual. 

 

Contact your national DHOLLANDIA distributor if you have any questions regarding the installation, operation, repair and maintenance of 
DHOLLANDIA  liftgates,  to  obtain  replacement  copies  of  manuals  or  decals,  or  to  learn  about  available  equipment  options  for 
DHOLLANDIA liftgates. 

 

 

 

 

Take notice of following important disclaimers: 

DISCLAIMERS 

 

DHOLLANDIA disclaims liability for any personal injury, death, or property damage that results from 

operating a liftgate that has 

been modified from the original design

, without explicit written approval from the manufacturer.  

 

DHOLLANDIA disclaims liability for any personal injury, death, or property damage that results from 

use of aftermarket or non-

OEM replacement parts for service or repair of the liftgate

.  

 

DHOLLANDIA disclaims liability for any personal injury, death, or property damage that results from 

improper use of the liftgate

 

DHOLLANDIA disclaims liability for any personal injury, death, or property damage that results from 

overloading or improperly 

loading the platform

, disregard of the maximum rated lift capacity and the applicable load charts. 

 

There are no warranties, express or implied, including the warranty of merchantability or a warranty of fitness for a particular purpose 
extending beyond that set forth in this manual. 

 

 

The latest version of all manuals can also be downloaded from the DHOLLANDIA website

 

www.dhollandia.com → Downloads → User’s manuals → … select required manual

 

 

 

 

DHOLLANDIA US, LLC 

United States - East 

200 Hilton Street West 

Easton PA 18042 

Tel: 855-894-1188 

[email protected] 

 

DHOLLANDIA CANADA, Inc. 

Canada 

2105 Boulevard des Entreprises 
Terrebonne Quebec J6Y1W9 

Tel: 888-750-5438 

[email protected] 

DHOLLANDIA MEXICO, Inc. 

Mexico 

Fraccionamiento Industrial 

Dinamo del Norte, 

Calle Tierra 103-105 

C.P. 65500, Salinas Victoria, 

Monterrey- Nuevo Leon 
Tel: +52 81 13340968 

[email protected] 

 

DHOLLANDIA US, LLC 

United States - West 

12968 Santa Ana Avenue 

Fontana CA 92337 

Tel: 855-856-8225 
[email protected] 

Summary of Contents for DH-S Series



















































































Reviews: