31
DHOLLANDIA
When using the stabilizing legs, the operator should observe following points:
Ensure that the stabilizing legs are positioned on solid even ground. In case of soft terrain (sand, gravel,…), solid support
blocks must be used under the stabilizing legs.
Use the stabilizing legs upon every loading / unloading activity.
Ensure the stabilizing legs are completely raised and stowed in travel position before moving the vehicle.
The stabilizing legs should be used to stabilize the vehicle only. They are not suitable to lift the vehicle.
The height of the stabilizing legs should be adjusted during loading and unloading, to adapt them to the variation in the
vehicle suspension. Failure to properly adjust height of stabilizing legs increases the risk of serious injury or death to the
operator and any bystanders.
In case of mechanical legs, be very careful when releasing the mechanical lock to store the legs in travel position. If the
vehicle is loaded, the extra weight in the vehicle body could apply load to the sliding foot of the leg, and its locking
mechanism. To reduce the risk of finger pinching and serious bodily injury, keep fingers away from the sliding parts of the
legs.
Operation:
Arctic control box (OAE041.BP)
Joystick control box (ref. OAE030.BT)