28
DHOLLANDIA
LOWER the platform to the ground. If
liftgate is level-ride, allow the automatic
tilt to reach ground level.
LIFT the platform off the ground. If
liftgate is level-ride, allow the automatic
tilt to return the platform to level pitch.
When riding on the platform, make sure
you stand min. 250 mm away from the
inboard platform edge, make sure your
footing is solid, and ALWAYS maintain 3
points of contact. [see 7.4 page 9].
NEVER pull the load from the vehicle onto the platform.
ALWAYS push it out. Pulling the load from the vehicle
can result in a fall from the platform and cause serious
injury or death.
Before lifting or lowering loads, make sure the loads are secured
on the platform surface. Deploy the platform cart stops (if so
equipped), lower loads on a pallet jack down on the platform
surface or immobilise the load via equivalent securement device.
LOWER the platform to the ground.
If liftgate is level-ride, the
AUTOMATIC TILT will decline
the platform to the ground
while you hold the LOWER
buttons
If liftgates is half-dip ride, the
platform will tilt down
progressively as it is
Loading and unloading
Make sure you comply with load charts
and instructions at all times
LIFT the platform off the ground.
If liftgate is level-ride, the
AUTOMATIC TILT will return
the platform to level pitch while
you push the LIFT buttons
If liftgate is half-dip ride, the
platform will tilt up
progressively as it is LIFTED.