Dhollandia DH-AR Series, Operation Manual

Page: 17 / 46

16
DHOLLANDIA
2. A main battery disconnect switch integrated in the external control
box [optional]. This switch enables the operator to switch the main
battery power to the hydraulic ramp on / off. If available, the operator
MUST switch off the main battery disconnect switch after each use of
the hydraulic ramp.
3. A combination of both

Fuses [standard]. A 15A fuse for the electrical control circuit comes mounted in the pump unit and in the main external control
box (for most types). A 150 – 250A fuse for the electrical main battery circuit is supplied by the truck manufacturer or by
DHOLLANDIA. Both fuses protect the electrical circuits against short-circuits and amperage peaks.

Decals [standard]. The hydraulic ramps are supplied with a number of
operation deals, load diagrams and safety decals, most of them to be
applied to the vehicle body during installation. These decals must
always be kept clean and legible and replaced whenever required.