background image

Skipping Needles Matrix for detail. This matrix provides clear information for operation. 

Skipping Needles Matrix

1, 2  

2, 3

Forward, brake, no reverse

3, 4

Lipo battery

5, 6

NiMh battery

Needles

Functions

Forward, brake, reverse

① ② ③

④ ⑤ ⑥

Needles placement and corresponding 
functions

6kgs Servo

Features

: Plastic gears, ball bearings

Working voltage

4.8-6.0V

Speed (seconds/60°C)

0.18-0.16sec/60º

Torque

6kg/cm

Net weight

40g

Size(LxWxH)

: 40.8x20.1x38mm

NiMh Battery

Warning

► Never mix batteries from different manufacturers.
► Never mix batteries of different capacities. 
► Never mix batteries of different chemistries, i.e. NiCd, NiMh, Lithium etc.

► Never DROP the battery if you can help it as NiMh batteries damage internally quite easily.
► Never store NiMh in the refrigerator.
► Never expose to extreme heat.
► Never make wrong polarity connection when charging and discharging battery packs. Always double

check polarity of battery's connector to make sure red wire to red wire and black wire to black wire.

► Please always use a smart charger (with automatic power cut-off function ) to charge NiMh battery. 

Charging NiMh battery without an attention may cause battery explosion.

► When charging NiMh battery, please always put the battery in a wire-proof place to avoid any accident.
► NiMh batteries have higher energy than NiCd battery, but they have higher self discharging rate and 

shorter shelf life. Therefore, please always keep NiMh cells / battery pack in charged condition after 
using or before storing them

► NiMh batteries and packs should be charged at least every six months, otherwise the capacity will 

reduce or it can become dead. For safety reasons, we usually ship NiMh battery without fully charged.
NiMh battery must be charged before use, and allow 3-5 cycles of charging and discharging for battery 
capacity to recover.

Caution!

NiMh battery pack may be hot. Do not allow the battery's internal electrolyte to get in the eyes or on skin.
Wash affected areas with soap and water immediately if they come in contact with the electrolyte. If 

electrolyte makes contact with the eyes, flush with large amounts of water for 15 minutes and seek 

medical attention immediately.

Environmental impact

Improper disposal of NiMh batteries poses less environmental hazard than that of NiCd because of the
absence of toxic cadmium. However, mining and processing the various alternate metals that form the

negative electrode may pose other types of environmental impact, depending on the metal, mining 

 

method,

 and environmental practices of the mine.

This SCT comes with a single pack high rate NiMh stick-type battery.
very careful. Please read the following points with regard to charging and discharging NiMh batteries. 

Handling NiMh batteries should be 

4

Summary of Contents for HUNTER 8135





























Reviews: