2 - 12
Chapter 2: RM3200D System Design
2.3 Hardware Modules
2.3.2 DSP Frame Modules
Several modules for audio and controlling inputs and outputs are available for the
RM3200D. All modules for the DSP Frame have the same dimensions, 3U high and 4 HP
wide. All modules are hot plugable.
Figure 4: DSP Frame RM330-042: Rear view
RM3200D DSP-Frame with 2 Backplanes 330-042
*
RS 232 / 422
330-321
Sync-Module
or GPIO-Module
Slot-Number:
Audio-Modules
or GPIO-Modules
GPIO-Module
Sync.-Module
or GPIO-Module
Audio-Modules
or GPIO-Modules
GPIO-Module
1
2
3
4
5
6
7
8
9
10
Slot-Number:
11
12
13
14
15
16
17
18
19
20
* each Backplanes with 10 Slots
Redundant
Power Supply 1
Redundant
Power Supply 2
Redundant
Power Supply 3
CAN-Bus
Connectors
Main Power
230V AC
Pin1: +24V
Pin2: CAN+
Pin3: CAN-
Pin4: GND
Serial Number
2000/301
DSP Frame
330-042
SYNC
In
Out
330-410
TTL-Wordclock Input
or AES3/EBU Input
TTL-Wordclock Output
(system sample rate)
Flashing LED
indicate basic
Module functions
Module Power
good
AES3/EBU-Signal
present
System Sync.
from this Module
Flashing LED
indicate basic
Module functions
Module Power
good
330-082
Power Supply
200 ... 250V AC
24V / 3.2A
330-082
Power Supply
200 ... 250V AC
24V / 3.2A
330-082
Power Supply
200 ... 250V AC
24V / 3.2A
RS 232 / 422
330-321
MADI-Module
Sync-Module
GPIO-Module
GPIO-Module
56 In, 56 Out, Fiberoptic and
TTL-Wordclock BNC Input or AES3/EBU Input
and TTL-Wordclock Output
8 semiconductor 4 Control Optocoupler-Inputs
+ 2 Analog Potentiometer Inputs
TTL-Wordclock BNC Input or Output
8 el-mech. 4 Control Optocoupler-Inputs
+ 2 Analog Potentiometer Inputs
330-421:
330-410:
330-310:
330-311:
Audio-Modules
2 AES3 /EBU-Input s
4 Analog Line Inputs
4 Analog Mic/Line Inputs
2 AES3 /EBU-Inputs and 2 AES3 /EBU Outputs
2
AES3 /EBU-Outputs
4
Analog
Line
Outputs
2 Stereo Headphone Outputs
330-110:
330-120:
330-121:
330-111:
330-210:
330-220:
330-221:
Available Modules
Digital Input Module
Analog Line Input Module
Analog Mic/Line Input Module
Digital Input/Output Module
Digital
Output
Module
Analog
Line
Output
Module
Analog
Headphone
Output
Module
Power Supply-
Module fail
Power good
Serial-Number
Frame Type
Mains Power Switch
2 Fuses
3.15 A
time lag
5 x 20 mm
IEC 60320
AC Power Connector
Chassis / GND
Terminal
Important Note:
The built-in A/D- and D/A-converter modules as well as the digital
in- and output modules are always intended for 4 channel use (or 2 stereo). This
means that they have the same “density” and can be interchanged (without having to
reconfigure the mixer)