2 - 6
Chapter 2: RM3200D System Design
2.1 Principle of Operation
2. RM3200D System Design
2.1 Principle of Operation
The RM3200D Mixing and Routing System is built with 2 main hardware parts, the:
1. DSP Frame with all Inputs, Outputs, the Control System and DSP
1)
Power
2. Control Desk with all Faders, Push Buttons and Displays
Both are coupled via an industry standard CAN-bus connection. Thus, the units can be
placed separately from each other without big wiring efforts.
The DSP Frame can also be used as single device without the control desk, for example as
a routing system. In this case, the device is controlled over a controlling protocol.
With our DHD Control Protocol you can access any available internal function via CAN Bus
or commonly via RS232/RS422.
Also, we have some PC based windows software tools:
•
Configuration Software, for the configuration of the system and for maintenance
functions
•
Routing Software (RM330-050) which also includes a small scheduler and macro
functions
1.) Digital Signal Processing
Figure 1: RM3200D DSP Frame and Control Desk coupled via CAN Bus