Individual time settings
It is possible to set a different time for one or
multiple players. To do this browse with through
the settings menu until is flashing. Now you can
change the time for each side independently.
4.
Select the side you want to adjust by pressing
on that side. This time will start flashing and also
become visible on the red side.
5.
Adjust the time on the red side and confirm by
pressing
on the modified side.
6.
Repeat the above steps for all sides you want to
change individually. Press on the red side to
leave the settings menu.
When individual time settings are active will be
displayed on all sides of the Cube. Press
on the
side of the first player to start his/her time.
Changing display contrast
Press and hold down
on the yellow side while
the red side is turned upwards. Now you can
increase the contrast by pressing or decrease the
contrast using while holding the
button on
the yellow side.
5. Replacing the batteries
When
becomes visible on the red side you
need to replace the Cube’s batteries.
1.
Remove the green side case cover with a flat
object
2.
Remove the two screws that hold the two
battery covers and then remove battery cover.
3.
Remove the old batteries.
4.
Wipe off the new batteries with a dry, soft
cloth.
5.
Place the batteries into the unit with the
positive (+) side facing out.
6.
Replace the battery covers and secure them in
place with the two screws.
7.
Replace the green side case cover.
8.
Dispose of the old battery as prescribed in your
country or region.
Note: Do not use rechargeable batteries
in the Cube; Non-rechargeable batteries
are not to be recharged; Rechargeable batteries are
to be removed from the Cube before being charged;
Rechargeable batteries are only to be charged
under adult supervision;
Different types of batteries or new and used
batteries are not to be mixed; Batteries are to be
inserted with the correct polarity; Exhausted
batteries are to be removed from the Cube.
The supply terminals are not to be short-circuited.
6. Warranty
DGT provides a warranty of 24 months on
manufacturing and material defects of the Cube.
When applying for warranty, contact your vendor
directly. You need the warranty card and a proof of
purchase to make a warranty claim.
These warranty conditions only apply when the
CUBE is used with care. Display fracture is excluded
from the warranty obligation.
Turn and move the Cube with care
Prevent impact between the glass displays and
other objects.
Technical specifications
Batteries:
2x Button cell (LR44, 1,5V)
Service life:
1000 hours of use on one set of
batteries with capacity
100mAH
Accuracy:
+/- 1 second per hour
Maximum
values
From 9 hours 59 minutes to 19
hours 59 minutes upcount
Cleaning:
Use a damp cloth without
aggressive cleaning products
The DGT Cube meets the following EU
directives:
EMC 2004/108/EG: EN 61000-6-3:2007 & EN 61000-
6-1:2007
Reduction of environmentally harmful material
RoHs: 2002/95/EC
Electric Toy Safety EN62115:2005
