DGStation relook 300S, Operation Manual

Page: 21 / 113

■ You can setup Tuner 2 if Connection is Separated . To copy the values of LNB 1 to LNB 2 , just
press BLUE button. Press YELLOW button to go to Channel Search menu.
You can scan the channels by Auto or Manual by LEFT/RIGHT button.
Auto : This is to scan all channels in the satellites you setup in LNB Setting menu. Set Satellite
Name , Network Search option and Search Method option by LEFT/RIGHT button and press
OK on Start Searching to start scanning.
Manual : This is to scan channels on specific TP. Set Satellite Name , Frequency , Symbol
Rate , Polarity values. You can press OK to check the values on Frequency and Symbol Rate
menu or press NUMERIC buttons to input digit values directly. Press OK on Manual Search to
20