DGStation relook 300S, Operation Manual

Page: 13 / 113

To read and load the A/V data and to update S/W
⑫
Serial
RS232C
⑬ IF OUT
Loop through to another Set Top Box
INSTALLATION
EQUIPMENT CONNECTION
■ DIRECT CONNECTION TO TV SET
Connect RCA, TV SCART or RF cable from the outputs on the rear panel to the inputs of the TV
set.
■ CONNECT THE TV SET WITH THE VCR
A. Connect a VCR by using VCR Scart
After connect the relook 300S with TV set as above, connect VCR Scart cable from the VCR
Scart output on the rear panel to the input of the VCR.
B. Connect the TV set through the VCR
Connect RCA, VCR Scart or RF cable from the outputs on the rear panel to the inputs of the
VCR. After that, connect VCR outputs to the inputs of the TV set.
12