Important Notes on Handling and Use
This machine is a precision device. To ensure the full performance of this machine, be sure to ob-
serve the following important points. Failure to observe these points may not only result in loss of
performance but may cause faulty operation or a malfunction.
This Machine Is a Precision Device
•
Handle carefully, and never subject the machine to impacts or excessive force.
•
Never attempt to imprint material that is not covered by the specifications.
Install in a Suitable Location
•
Install in a location that meets the specified conditions for temperature, relative humidity, and the
like.
•
Install in a stable location offering good operating conditions.
•
Never install in an environment where silicone substances (oil, grease, spray, etc.) are present.
Doing so may cause poor switch contact.
Moving the Machine
•
When moving the machine, be sure to attach the retainers. Moving the machine without attaching
the retaining materials may result in damage. Also remove included items such as film retainers.
•
For the procedure to follow when moving the machine, see the user's manual.
About Imprinting
•
Never attempt to imprint on the areas of a material that have lines or holes.
•
Imprint results will vary according to the source data, the material, and subtle settings. Before per-
forming actual imprinting, we recommend carrying out a test imprint.
About the Laser Light
•
This machine uses laser light for foil transferring and for positioning.
•
The output of the laser light used for foil transferring is powerful. If the housing or light-blocking
cover is cracked, the laser light may be emitted outside of the machine, possibly leading to eye
injury.
•
The output of the laser light used for positioning is weak. Staring directly at this laser light with the
light-blocking cover opened poses no hazards.
13
