Installing the Software
Important: Install the software before connecting the machine to a computer.
Make sure to connect the machine to the computer by following the given procedure. Failure to follow
the correct procedure may make installation impossible.
Important: Note the following points when installing the software.
• Even if METAZAStudio and SFEdit2 have already been installed, be sure to install the software from
the DGSHAPE Software Package CD included with the machine.
• If METAZAStudio and SFEdit2 have been installed, carry out the installation without uninstalling
these pieces of software.
Procedure
A
Beforeyoustartinstallationandsetup,makesuretheUSBcableisNOTconnected.
B
LogontoWindowsasanadministratororasamemberoftheAdministratorsgroup.
C
InserttheDGSHAPESoftwarePackageCDintothecomputer'sCD-ROMdrive.
When the automatic playback window appears, click [Run menu.exe]. If the [User Account Control]
window appears, click [Allow] or [Yes]. The install menu appears automatically.
D
Click[Install].
The drivers and software that will be installed will be displayed.
E
Click[OK].
Install LD Driver and the other software at the same time.
"
P.16「TheSoftwareYouCanInstallandSetUp」
You can also install LD Driver and the other pieces of software separately.
"
Fortheprocedure,seetheuser'smanual.
Installing the Software
17
