x 6
x 4
2” Deck Screws
2” Deck Screws
Top
Middle
Bottom
View from Side
x 6
x 4
2” Deck Screws
2” Deck Screws
Top
Middle
Bottom
View from above
Turn wall 90 degrees onto back
Tip wall into upright position
View from side
Remove previously installed screws
from one side only of bottom section
x 6
2” Deck Screws
REMOVE
ONE SIDE ONLY
x 6
3” Deck Screws
From inside the wall, secure the base section to
the middle section using 3” deck screws
through the abutting braces. Start at the side
which still has 2” deck screws installed, and
work your way across, making sure that the
front surface of the wall is flush.
Any overhang should be on the higher section,
so someone sliding down the face would not
catch on it.
Middle
Bottom
Middle
Bottom
Middle
Bottom
Reinstall previously removed screws
from side of bottom section
x 6
2” Deck Screws
REINSTALL
ONE SIDE ONLY
View from side
View from side
Repeat steps 4 through 6 for
top/middle section. (12 and 14ft. walls only)
Lay wall sections on side in appropriate order
1
2
3
4
5
6
7
Move wall into final position. Wall must be on
a firm level surface, such as concrete. Drill holes
through pre-installed brackets inside wall into
foor and install wedge
bolts
. (see next page)
8
DGS - 17 Lucienne Ave. Danielson, CT 06239 - 800-932-3339 - [email protected]
Please visit gymsupply.com for product assembly videos.
