DFI TPC150-SD User Manual Download Page 59

Page: 59 / 66

www.dfi.com

Chapter 8 Supported Software

Chapter 8

3. Read the readme information and

then click “Next.”

4. Setup is currently installing the

driver. Click “Next” to install to

the default folder or select to

change the installation folder.

The setup will then inform you

that the Intel

Rapid Storage

Technology will be installed on

your system.

5. Click “Yes, I want to restart

this computer now”, then

click “Finish.”

Restarting the system will

allow the new software

installation to take effect.

1. The setup program is preparing

to install the driver.

2. The setup program is now ready

to install the utility. Click “Next”

to continue.

3. Click “I accept the terms in the

license agreement” if agree with

the terms in the agreement and

then click “Next”.

Infineon Trusted Platform Module Driver (Optional)

Please use the following procedure to install the Infineon TPM Driver and Tool.

Summary of Contents for TPC150-SD



































































Search results

Summary of Contents for TPC150-SD

Reviews:

Related manuals for TPC150-SD

Brands by name

Popular brands

DFI TPC150-SD, User Manual

Search results

Summary of Contents for TPC150-SD

Reviews:

Related manuals for TPC150-SD

Brands by name

Popular brands