DFI TPC150-SD User Manual Download Page 47

Page: 47 / 66

Chapter 7 BIOS Setup

www.dfi.com

Chapter 7

Note:

a. You can take advantage of flash tools to update the default configuration of the

BIOS (SPI ROM) to the latest version anytime.

b. When the BIOS IC needs to be replaced, you have to populate it properly onto the

system board after the EEPROM programmer has been burned and follow the

technical person's instructions to confirm that the MAC address should be burned

or not.

Notice: BIOS SPI ROM

1. The Intel

Management Engine has already been integrated into this system board. Due to

safety concerns, the BIOS (SPI ROM) chip cannot be removed from this system board and

used on another system board of the same model.

2. The BIOS (SPI ROM) on this system board must be the original equipment from the factory

and cannot be used to replace one which has been utilized on other system boards.

3. If you do not follow the methods above, the Intel

Management Engine will not be updated

and will cease to be effective.

Updating the BIOS

To update the BIOS, you will need the new BIOS file and a flash utility. Please contact techni-

cal support or your sales representative for the latest BIOS file and the firmware update utility.

For instructions on how to update BIOS with the flash utility, please see

https://www.dfi.com/

knowledge/video/31

from the Knowledge Base of the DFI website.

Read file successfully. (path= “platform.ini”)

Insyde H20FFT (Flash Firmware Tool) Version (SEG) 100.00.08.10

Initializing

Current BIOS Model name: TPC150-SD

New BIOS Model name: TPC150-SD

Current BIOS version: B186.24A

New BIOS version: B188.24A

Updating Block at FFFFF000h

0% 25% 50% 75% 100%

100%

C:\SD100>_

Information

Please do not remove the AC power

Summary of Contents for TPC150-SD



































































Search results

Summary of Contents for TPC150-SD

Reviews:

Related manuals for TPC150-SD

Brands by name

Popular brands

DFI TPC150-SD, User Manual

Search results

Summary of Contents for TPC150-SD

Reviews:

Related manuals for TPC150-SD

Brands by name

Popular brands