DFI PR610-C621 User Manual Download

Page: 45 / 49

Chapter 5

SUPPORTED SOFTWARE

User's Manual |

PR610-C621

3. Go through the readme docu-

ment for more installation tips

then click “Install”.

5. After completing installation,

click “Restart Now” to exit

setup.

Restarting the system will al-

low the new software installa-

tion to take effect.

4. The step displays the installing

status in the progress.

ASPEED Graphics Drivers

The 2D graphics processor integrated in the AST2500/AST2510 processors of the IPMI re-

quires drivers to be installed on your OS for optimal operation.

1. Setup is now ready to install

the graphics driver. Click

“Next”.

2. Click Install and authorize the

install wizard to modify data.

3. Wait for the installation pro-

cess to complete, and press

Finish when the process is

completed.

Summary of Contents for PR610-C621


















































Search results

Summary of Contents for PR610-C621

Reviews:

Related manuals for PR610-C621

Brands by name

Popular brands

DFI PR610-C621, User Manual

Search results

Summary of Contents for PR610-C621

Reviews:

Related manuals for PR610-C621

Brands by name

Popular brands