35
Chapter 3
BIOS SETTINGS
User's Manual |
PR610-C621
X
BMC Configuration
Configure the BMC related settings in this sub-menu.
X
Advanced
X
H2O IPMI Configuration
InsydeH2O Setup Utility
Rev. 5.0
F1
Help
Esc
Exit
↑/↓
Select Item
←/→
Select Item
F5/F6
Change Values
Enter
Select
X
SubMenu
F9
Setup Defaults
F10
Save and Exit
Enable/Disable IPMI Support.
Note: If changing to enable, BMC
detailed information only valid
after rebooting.
BMC Configuration
Watchdog Timer Support
Not disable in OS
Watchdog Timer Timeout
Watchdog Timer Action
►
User Configuration
LAN Channel Number
IPv4 Source
IPv4 IP Address
IPv4 Subnet Mask
IPv4 Gateway Address
IPv6 Mode
IPv6 Prefix Length
IPv6 Static IP Address
IPv6 Gateway Address
Advanced
<Enabled>
<Enabled>
[5]
<Hard Reset>
[1]
<Static>
192.168.0.100
255.255.0.0
0.0.0.0
<Enabled>
[64]
0:0:0:0:0:0:0:0
0:0:0:0:0:0:0:0
Wathcdog Timer Support
Enable or disable the BMC's Watchdog Timer (WDT) function at the start of POST. The follow-
ing fields will be configurable when this field is enabled.
Not disable in OS
Keep WDT enabled when boot in OS.
Watchdog Timer Timeout
Enter the number of minutes the system firmware has to boot the OS before it takes the Time-
out Action. Valid values are from 2 to 8 minutes.
Watchdog Timer Action
Select which timeout action shall be carried out when the WDT is up — No Action, Hard Reset,
Power Down, or Power Cycle.
LAN Channel Number
BMC's LAN channel number. There are three channels available — channel number from 1 to 3.
To configure a LAN channel, insert a channel number, and the IP settings of the selected chan-
nel will be listed in the following.
IPv4 Source
Select how BMC IPv4 settings are configured: automatically (DHCP) or manually (Static).
IPv4 IP Address
Enter the BMC IPv4 IP address. This field is only required when using Static IP.
IPv4 Subnet Mask
Enter the BMC IPv4 Subnet Mask. This field is only required when using Static IP.
IPv4 Gateway Address
Enter the BMC IPv4 Gateway Address. This field is only required when using Static IP.
IPv6 Mode
Enable or disable Internet Protocol v6 (IPv6).
IPv6 Prefix Length
Set IPv6 prefix length.
IPv6 Static IP Address
Enter the BMC IPv6 IP Address.
IPv6 Gateway Address
Enter the BMC IPv6 Gateway Address.
