2
12
Hardware Installation
2.5 Jumper Settings for Wake-On-Keyboard/Mouse
Positionnement des Cavaliers pour Réveil-Sur-Clavier/
Souris
Jumpereinstellungen für die Wake-On Tastatur/Maus
Jumper JP1 - Wake-on-Keyboard/Mouse
To use the keyboard or mouse to
power-on the system, please follow the
steps below.
1. Set JP1 to 2-3 On, enable.
2. Keyboard/Mouse Power On in the
Integrated Peripherals setup of the
Award BIOS must be set
accordingly. Refer to section 3.10
(chapter 3) for more information.
Warning:
1. If JP1 was previously enabled with a password set in the
KB Power On Password field, and now you wish to
disable the Wake-On-Keyboard (password) function, make
sure to set the Keyboard/Mouse Power On field to
Disabled prior to setting JP1 to disabled. You will not be
able to boot up the system if you fail to do so.
2. The power button will not function once a keyboard
password has been set in the KB Power On Password
field of the Integrated Peripherals setup. You must type
the password to power-on the system.
3. The 5VSB power source of your power supply must
support
≥
720mA (minimum).
1-2 On: Disable
(default)
2-3 On: Enable
1
2
3
1
2
3
