2
Hardware Installation
27
2.2.3 Setting the Jumpers on the System Board
2-3 On: Normal
(default)
1-2 On:
Clear CMOS Data
2.2.3.1 Jumper Settings for Clearing CMOS Data
Jumper JP1
Clear CMOS Data
If, for some reason, the CMOS
data becomes corrupted, the
system can be reconfigured with
the default values stored in the
ROM BIOS. To load the default
values, power off your system
and unplug the power cord. If
you are using an AT power
supply, you do not need to
unplug the power cord. Set JP1
pins 1 and 2 to On. Wait for a
few seconds and set JP1 back to
its default setting, pins 2 and 3 On. You may now plug the power
cord and power-on your system.
1
2
3
1
2
3
Summary of Contents for P5BVP
