3
Award BIOS Setup Utility
41
To use the Wake-On-LAN function, set this field to Enabled. Your
LAN card package should include a cable. Connect one end of the
cable to the wakeup header on the card and the other end to
location J11 on the system board. The network will detect Magic
Packet and assert a wakeup signal to power-on the system.
Resume On Alarm
Enabled
When Enabled, you can set the date and time you would
like the Soft Power Down (Soft-Off) PC to power-on.
However, if the system is being accessed by incoming calls
or the network (Resume On Ring/LAN) prior to the date
and time set in this field, the system will give priority to
the incoming calls or network. Date (of Month) and
Timer (hh:mm:ss) will appear right below this field.
Disabled
Disables the automatic power-on function. (default)
Date (of Month)
0
The system will power-on everyday according to the time
set in the Timer (hh:mm:ss) field.
1-31
Select a date you would like the system to power-on. The
system will power-on on the set date, and time set in the
Timer (hh:mm:ss) field.
Timer (hh:mm:ss)
This is used to set the time you would like the system to power- on.
If you want the system to power-on everyday as set in the Date (of
Month) field, the time set in this field must be later than the time of
the RTC in the Standard CMOS Setup.
