1
10
Introduction
The Watchdog Timer function allows your
application to regularly “clear” the system at
the set time interval. If the system hangs or fails to function, it will
reset at the set time interval so that your system will continue to
operate.
DDR2 is a higher performance DDR technology
whose data transfer rate delivers bandwidth of 4.3
GB per second and beyond. That is twice the speed of the conven-
tional DDR without increasing its power consumption. DDR2
SDRAM modules work at 1.8V supply compared to 2.6V memory
voltage for DDR modules. DDR2 also incorporates new innovations
such as the On-Die Termination (ODT) as well as larger 4-bit pre-
fetch against DDR which fetches 2 bits per clock cycle.
The integrated graphics delivers exceptional 3D
graphics performance.
The Realtek RTL8111C PCI Express Gigabit
controller suppor ts up to 1Gbps data
transmission.
watchdog timer
graphics
Features
DDR2
gigabit lan
Summary of Contents for NP900-B16C
