2
Hardware Installation
35
•
Line-in Jack (Light Blue)
This jack can be connected to the line-out jack of any exter-
nal audio devices such as Hi-fi set, CD player, AM/FM radio
tuner, synthesizer, etc. Connect a stereo cable from the line-
out jack of your external device to this line-in jack.
•
Mic-in Jack (Pink)
This jack is used to connect an external microphone. Use the
C-Media application software to select between using this jack
and the front audio’s mic-in jack.
Note:
The functions of these audio jacks will change to support 6-
channel audio output only after you have installed the audio
driver and set the appropriate configuration.
Front Audio
The front audio connector (J25) allows you to connect to the
line-out and mic-in jacks that are at the front panel. Using this
connector will disable the rear audio’s line-out and mic-in func-
tions.
Remove the jumper caps from pins 5-6 and pins 9-10 of J25
prior to connecting the front audio cable connector. Make sure
pin 1 of the cable connector is aligned with pin 1 of J25. If you
are not using this connector, make sure to replace the jumper
caps back to their original pin locations.
The front audio is disabled.
The rear audio is enabled.
The front audio is enabled.
The rear audio is disabled.
Pins 5-6 and 9-10 short
(default)
Pins 5-6 and 9-10 open
