32
Chapter 3 BIOS Setup
Chapter 3
Trusted Computing
This section configures settings relevant to Trusted Computing innovations.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Confi guration
TPM Support
TPM State
Pending Operation
Current Status Information
TPM Enabled Status:
TPM Active Status:
TPM Owner Status:
Advanced
[Enabled]
[Disabled]
[None]
[Disabled]
[Deactivated]
[Owned]
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Reset
ESC: Exit
Enables or Disables
BIOS support for security
device. O.S will not show
Security Device. TCG
EFI protocol and INT1A
interface will not be
available.
Security Device Support
This field is used to enable or disable the BIOS support for the security device. O.S will
not show the security device. TCG EFI protocol and INT1A interface will not be
available.
TPM State
This field is used to enable or disable the security device.
Note:
Your computer will reboot during restarting in order to change the device state.
CPU Configuration
This section is used to configure the CPU setting.
Hyper-threading
Enables this field for Windows XP and Linux which are optimized for Hyper-Threading
technology. Select disabled for other OSes not optimized for Hyper-Threading technol-
ogy. When disabled, only one thread per enabled core is enabled.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capabili-
ties provided by the Vanderpool Technology.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
CPU Confi guration
Intel(R) Core(TM) i7-3770 CPU @3.40GHz
CPU Speed
Processor Cores
Intel HT Technology
Hyper-threading
Intel Virtualization Technology
Advanced
3400 MHz
4
Supported
[Enabled]
[Enabled]
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Reset
ESC: Exit
Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
Technology) and Disabled
for other OS. (OS not
optimized for Hyper-
Threading Technology).
When Disabled, only one
thread per enabled core is
enabled.
