30
Chapter 3 BIOS Setup
Chapter 3
ACPI Power Management Configuration
This section is used to configure the ACPI Power Management.
Select the highest ACPI
sleep state the system will
enter, when the SUSPEND
button is pressed.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
ACPI Power Management Confi guration
ACPI Sleep State
Resume by PME
Resume by USB
Resume by PS2 KB (S1, S3)
Resume by PS2 MS (S1, S3)
Resume by Ring
Wake System with Fixed Time
Advanced
[S1 (CPU Stop Clock)]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
ACPI Sleep State
Select the highest ACPI sleep state that the system will enter when the SUSPEND but-
ton is pressed.
S1(CSC) Enable the CPU Stop Clock function.
S3(STR) Enable the Suspend to RAM function.
Resume by PME
Enable this field to use the PME signal to wake up the system.
Resume by USB
When Enabled, this system uses the USB signal to carry out a wakeup event.
Resume by PS2 KB/MS (S1, S3)
When Enabled, this system uses the KB/MS signal to carry out a wakeup event.
Resume by Ring
Enable this field to use the Ring signal to wake up the system.
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Reset
ESC: Exit
Wake System with Fixed Time
Enable or disable the system to wake on the alarm event. When Enabled, the system
will wake on the hr::min::sec. specified.
