8 3
3
BIOS Setup
3.1.7 PC Health Status
The settings on the screen are for reference only. Your version may not be identical
to this one.
3.1.7.1 Shutdown Temperature
You can prevent the system from overheating by selecting a tem-
perature in this field. If the system detected that its temperature
exceeded the one set in this field, it will automatically shutdown.
3.1.7.2 CPUFan Fully On If CPUTemp
This field is used to select the CPU temperature that will allow the
CPU fan to rotate at full speed.
3.1.7.3 CPUFan Turn Off If CPUTemp
This field is used to select the CPU temperature that will allow the
CPU fan to rotate at a start speed which is the slowest speed.
Note:
1. If the CPU temperature runs between the highest (set in
the “CPUFan Fully On If CPUTemp” field) and lowest (set in
the “CPUFan Turn Off If CPUTemp” field) temperature, the
system will automatically adjust the CPU fan’s speed
according to the temperature.
2. If you want to reduce the CPU fan’s noise or prevent CPU
overheat, select a lower temperature in the “CPUFan Fully
On If CPUTemp” field to allow the CPU fan to rotate full
speed at the selected lower temperature.
Summary of Contents for LanParty UT nF3 250 Gd
Page 1: ...System Board User s Manual 81000414 ...
Page 117: ...B Troubleshooting 117 ...
