7 9
3
BIOS Setup
3.1.5.6 HDD Down In Suspend
The default setting is Disabled. When enabled, the hard drive will be
powered off once the system enters the Suspend mode.
3.1.5.7 Soft-Off by PBTN
This field allows you to select the method of powering off your
system.
Delay 4 Sec.
Regardless of whether the Power Management func-
tion is enabled or disabled, if the power button is
pushed and released in less than 4 sec, the system
enters the Suspend mode. The purpose of this
function is to prevent the system from powering off
in case you accidentally “hit” or pushed the power
button. Push and release again in less than 4 sec to
restore. Pushing the power button for more than 4
seconds will power off the system.
Instant-Off
Pressing and then releasing the power button at
once will immediately power off your system.
3.1.5.8 WOL (PME#) From Soft-Off
Set this field to Enabled to wake up the system via the onboard
LAN or via a LAN card that uses the PCI PME (Power
Management Event) signal to remotely wake up the system. Access
to the LAN card will cause the system to wake up. Refer to the
card’s documentation for more information.
3.1.5.9 WOR (RI#) From Soft-Off
Set this field to Enabled to wake up the system via an external
modem or via a modem card that uses the PCI PME (Power
Management Event) signal to remotely wake up the system. Access
to the modem card will cause the system to wake up. Refer to the
card’s documentation for more information.
Summary of Contents for LanParty UT nF3 250 Gd
Page 1: ...System Board User s Manual 81000414 ...
Page 117: ...B Troubleshooting 117 ...