74
3
BIOS Setup
3.1.4.13 Power On By Mouse
Disabled
Disables the power on by mouse function.
Mouse Move
When this option is selected, move the mouse to
power-on the system.
Mouse Click
When this option is selected, double-click the mouse
button to power-on the system.
3.1.4.14 Power On By Keyboard
Disabled
Disables the power on by keyboard function.
Password
When this option is selected, set the password you
would like to use to power-on the system in the
“KB Power On Password” field.
Hot Key
When this option is selected, select the function key
you would like to use to power-on the system in
the “Hot Key Power On” field.
Any Key
Press any key to power-on the system.
Keyboard 98
When this option is selected, press the “wake up”
key of the Windows
98 compatible keyboard to
power-on the system.
3.1.4.15 KB Power On Password
Move the cursor to this field and press <Enter>. Enter your pass-
word. You can enter up to 5 characters. Type in exactly the same
password to confirm, then press <Enter>.
The power button will not function once a keyboard password has
been set in this field. You must type the correct password to power-
on the system. If you forgot the password, power-off the system and
remove the battery. Wait for a few seconds and install it back
before powering-on the system.
3.1.4.16 Hot Key Power On
This field is used to select a function key that you would like to use
to power-on the system.
3.1.4.17 Onboard FDC Controller
Enabled
Enables the onboard floppy disk controller.
Disabled
Disables the onboard floppy disk controller.
Summary of Contents for LanParty UT nF3 250 Gd
Page 1: ...System Board User s Manual 81000414 ...
Page 117: ...B Troubleshooting 117 ...
