www.d
fi
.com
32
Chapter 3 BIOS Setup
Chapter 3
CPU Configuration
This section is used to configure the CPU.
Intel Speed Step
This field is used to enable or disable the Intel Enhanced SpeedStep Technology.
CPU C States
Enable or disable the CPU Power Management.
Hyper-Threading
Enables this field for Windows XP and Linux which are optimized for Hyper-Threading
technology. Select disabled for other OSes not optimized for Hyper-Threading technol-
ogy. When disabled, only one thread per enabled core is enabled.
Allows more than two fre-
quency ranges to be sup-
ported.
CPU Confi guration
Intel Speed Step <Enabled>
CPU C States
<Enabled>
Hyper-Threading <Enabled>
Advanced
F1
Help
↑
/
↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←
/
→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
Video Configuration
This section configures the video settings.
Primary Display
Set the initial priority.
Internal Graphics Device
Keep IGFX enabled or disabled based on the setup options.
Boot display
Set the display device combination.
Note:
To control "Primary Display" & "Boot display", first go to "Boot" menu and select
different "Boot Type" (page
43
).
Boot Type : Legacy Boot Type -> Hide Primary Display & Show Boot Display
Boot Type : UEFI Boot Type -> Show Primary Display & Hide Boot Display
Boot Type : Dual Boot Type -> Show Primary Display & Show Boot Display
Initial priority:
AUTO: PEG->PCIe->PCI
->IGFX
I G F X : I G F X - > P E G - >
PCIe->PCI
PEG: PEG->PCIe->PCI
->IGFX
PCI: PEG->PCIe->PCI
->IGFX
Video Confi guration
Primary Display
Internal Graphics Device
Boot display
PTN3460 Confi guration
LCD Panel Type
LVDS Panel Supported
Backlight Type
Advanced
F1
Help
↑
/
↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←
/
→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
<Auto>
<Auto>
<Auto>
<24 Bit>
<1024x768>
<Enabled>
<PWM Mode>
Primary Display
Auto
IGFX
PEG
PCI
